Input
Measured variable                  Displacement
Measuring range                    50-3000mm

Output
Start-Stop pulse                      RS 422 differential signal

Accuracy
-Resolution                              0.1mm/0.01mm/0.005mm
-Linearity                                 <0.002%F.S
-Repeatability                          <0.001%F.S
-Update frequence                  Controller dependent

Operating conditions
Magnet speed                         Any
Operating pressure                 350bar
Operating temperature           -40℃…100℃
Dew point,humidity                 90% rel. humidity,no condensation
Sealing                                    IP67 if mating connector is correctly fitted
Shock test                              100g single hit,IEC-Standard 68-2-27
Vibration test                         10g/10-2000Hz,IEC-Standard 68-2-2
Norms,EMC test                     Electromagnetic emission EN 50081-1
Electromagnetic im munity EN 50082-2
EN 61000,Criteria A,CE-qualified
Form factor,material
Sensor head                            Aluminum
Rod with flange                      Stainless steel 1.4301/SS X5CrNi1810
Position transimitter               Ring-or U-Magnet

Installation
Mounting position                  Any
Rod                                        Threaded flange M18*1.5 or 3/4”-16 UNF-3A,hex net M18
Magnet                                   Mounting plate and screws:amagnetic

Electrical connection
Connection type                     6 pin connector M16 or 2 m cable outlet
Input voltage                          24VDC
Current consumption             100mA typical
Ripple                                     <1% peak-peak
Electric strength                     500V(DC ground to machine ground)