Input
Measured value position
Stroke length 25…3250 mm
Output
Voltage 0…10 VDC and 10…0 VDC (min. load controller: > 5 kOhms)
Current 4(0)…20 mA or 20…4(0) mA (min./max. load: 0/500 Ohms)
Programming programming of set points using optional accessories 2 Accuracy
Resolution 16 bit (minimum 1 μm)
Linearity < ±0.02 % F.S. (minimum ±60 μm)
Repeatability ≤ ±0.005 % F.S. (minimum ±20 μm)
Sample rate up to 1200 mm: 0.5 ms
up to 2400 mm: 1 ms
> 2400 mm: 2 ms Operating conditions
Magnet movement velocity any
Operating temperature –40…+90 °C, Option –40…+100 °C
Operating pressure 350 bar, 700 bar peak (at 10×1 min)
Ingress protection IP67 with proper mating connector
IP68 for cable outlet
Shock test 100 g (single shock) / IEC-Standard 60068-2-27
Vibration test 15 g / 10…2000 Hz, IEC-Standard 60068-2-6 (resonance frequencies excluded)
EMC test electromagnetic emission according to EN 61000-6-4
electromagnetic immunity according to EN 61000-6-2
The sensor meets the requirements of the EC directives and is marked with CE Design/Material
Sensor electronics housing stainless steel 1.4305 / AISI 303 3
Sensor rod with flange stainless steel 1.4306; 1.4307 / AISI 304 L
Position magnet ring magnet, PA ferrite
Installation
Mounting position any
Mounting fitting flange Ø 18 f7, 6 bores for machine screws (ISO 4762)
Electrical connection
Connection type cable gland
M12 a-code (5 pin)
M16 (6 pin)
Operating voltage +24 VDC (+20 % / −15 %)
Current consumption 100 mA typically dependent on stroke length
Ripple ≤ 0.28 Vpp
Dielectric strength 500 VDC (DC ground to machine ground)
| 
