Input
Measuring range Displacement
Measuring rage 50 – 2000 mm Output
Voltage 0 – 10 VDC and 10 – 0 VDC (minimum load: > 5 kOhm)
Strom 4 – 20 mA or 20 – 4 mA (min. load: 0 Ohm / max. load: 500 Ohm) Accuracy
Resolution Infinite
Linearity, uncorrected < ± 0,02 % F.S. (Minimum ± 60 μm)
Repeatability < ± 0,001 % F.S.
Update Frequency > 1,5 kHz
Ripple < 0,01% F.S. Operating conditions
Magnet speed any
Operating Temperature -40° C … +75° C
pressure Rating 350 bar, 700 bar peak
Protection IP 67 (only if the mating cable connector is correctly fitted)
Shock Test 100 g (single hit) / IEC-Standard 68-2-27
Vibration Test 10 g / 10-150 Hz, IEC-Standard 68-2-6
Option:high vibration resistant 15 g / 20-2000 Hz
EMC Test Electromagnetic emission EN 61000-6-3
Electromagnetic immunity EN 61000-6-2 (EN 61326/A1)
EN 61000-4-2/3/4/6, Criteria A CE-certified Form factor / Material
Sensor head Stainless steel 1.4305 / AISI 303
Rod with flange Stainless steel 1.4301 / AISI 304
Position magnet Ring magnet Installation
Mounting position any
Mounting Flange Ø18h 6, 6 bores, machine screws (ISO 4762) Electrical connection
Connection type 6 pin connector or integral cable output (PUR-cable 3 x 2 x 0,25 mm2, Ø 7,9 mm)
Input voltage 24 VDC (+20 % / -15 %)
Current drain 50 – 140 mA, stroke length dependent
Ripple < 1% peak to peak
Electric strength 500VDC (DC ground to machine ground)
| 
