Input
Measured variables – Position
– Velocity
– Multi-position measurement max. 20 positions (CANbus, Profibus, EtherCAT)
Stroke length 25…5000 mm Output
Interfaces Analog, SSI, CANbus, Profibus-DP, EtherCAT Accuracy
Resolution Output dependent
Linearity < ± 0.02 % F.S. (Minimum ± 50 μm)1
Repeatability < ± 0.001 % F.S. (Minimum ± 2.5 μm)
Hysteresis < 4 μm
Ripple/Jitter Analog: 0.01 % F.S. / Digital: < ± 10 μm Operating conditions
Magnet speed Any
Operating temperature -40 °C…+75 °C
Dew point, humidity 90% rel. humidity, no condensation
Ingress protection Sensor electronics IP67
(with professional mounted housing and connectors)
Measuring rod with connecting cable for side cable entry IP65
Measuring rod with single wires and flat connector with bottom cable entry IP30
Shock test 100 g (single shock IEC-Standard 60068-2-27)
Vibration test 10 g / 10 – 2000 Hz IEC-Standard 60068-2-6
Standards, EMC test2 Electromagnetic emission EN 61000-6-4
Electromagnetic immunity EN 61000-6-2
EN 61000-4-2/3/4/6, Level 3/4, criterium A Design, material
Diagnostic display LED beside connector
Sensor electronics Aluminum
Measuring rod with flange Stainless steel 1.4301 / AISI 304
Operating pressure 350 bar, (700 bar peak) for hydraulic rod
Position magnet Ring magnets Electrical connection
Connection type Connector or cable outlet (output dependent)
Supply voltage 24 VDC (-15 / +20 %)
– Polarity protection up to -30 VDC
– Overvoltage protection up to 36 VDC
Current drain 100 mA typical
Ripple ≤ 0.28 Vpp
Electric strength 500 VDC (DC ground to machine ground)
| 
