Input
Measured variables             – Position
– Velocity
– Multi-position measurement max. 20 positions (CANbus, Profibus, EtherCAT)
Stroke length                       100…20,000 mm

Output
Interfaces                               Analog, SSI, CANbus, Profibus-DP, EtherCAT

Accuracy
Resolution                             output dependent
Linearity                                < ± 0.02 % F.S. (Minimum ± 100 μm)
Repeatability                         < ± 0.001 % F.S. (Minimum ± 2.5 μm)
Hysteresis                             < 4 μm

Operating conditions
Magnet speed                      any
Operating temperature        -40 °C…+75 °C
Dew point, humidity             90% rel. humidity, no condensation
Ingress protection1              IP30 (IP65 rating only for professional mounted guide pipe IP65 and if mating connectors are correctly fitted)
Shock test                            100 g (single shock IEC-Standard 60068-2-27)
Vibration test                       5 g / 10 – 150 Hz IEC-Standard 60068-2-6
Standards, EMC test             Electromagnetic emission EN 61000-6-4
Electromagnetic immunity EN 61000-6-2
EN 61000-4-2/3/4/6, Level 3/4, Criterium A

Design, Material
Diagnostic display                 LEDs beside connector
Sensor head                          Aluminum-diecasting housing
Sensor stroke                        Flexible plastic pipe, min. bend radius 250 mm, radius for shipping 400 mm
Position magnet                   Permanent magnet

Electrical connection
Connection type                   Connector or cable outlet (output dependent)
Supply voltage                     24 VDC (-15 / +20 %)
– Polarity protection            up to -30 VDC
– Overvoltage protection    up to 36 VDC
Current drain                       100 mA typical
Ripple                                  ≤ 0.28 Vpp
Electric strength                  500 VDC (DC ground to machine ground)