Input
Measured value Position, velocity / Option: Multi-magnet measurement (max. 4 positions simultaneous)
Stroke length Profile: 25…5000 mm / Rod: 25…7600 mm Output
Interface Ethernet Powerlink Standardization Group (ESPG)
Data protocol Powerlink V2 according to IEEE 802.3 Accuracy
Resolution – Displacement up to 1 μm
Update time 1.0 ms up 2400 mm / 2.0 ms up 4800 mm / 4.0 ms up 7600 mm stroke length
Linearity 1 < ±0.01 % F.S. (Minimum ±40 μm)
Repeatability < ±0.001 % F.S. (Minimum ±2.5 μm)
Temperature coefficient < 15 ppm/°C
Hysteresis < 4 μm
Operating conditions
Magnet movement velocity any
Operating temperature 0…+70 °C
Dew point, humidity 90 % rel. humidity, no condensation
Ingress protection 2 Profile: IP65 / Rod: IP67
Shock test 100 g (single shock), IEC-Standard 6008-2-27
Vibration test 15 g / 10…2000 Hz, IEC-Standard 6008-2-6 (resonance frequencies excluded)
EMC test
Electromagnetic emission EN 61000-6-4 (for use in industrial environment)
Electromagnetic susceptibility EN 61000-6-2
The sensor meets the requirements of the EC directives and is marked with CE Design/Material
Diagnostic display LEDs beside connector
Profile model:
Sensor electronics housing aluminum
Sensor profile aluminum
Rod model:
Sensor electronics housing aluminum
Rod with flange stainless steel 1.4301 / AISI 304 Installation
Mounting position any
Profile moveable mounting clamps or T-slot nuts M5 in base channel
Rod threaded flange M18×1.5 or ¾”-16 UNF-3A, Hex nut M18 Electrical connection
Connection type 4 pin connector M12-DF, 4 pin connector M8
Operating voltage 24 VDC (−15 / +20 %);
Polarity protection up to −30 VDC
Overvoltage protection up to 36 VDC
Current drain 110 mA typical
Ripple (power supply) < 0.28 Vpp
Dielectric strength 500 VDC (DC ground to machine ground)
| 
