Accuracy (including nonlinear, hysteresis and repeatability) ≤ ± 0.5%FS (typical), ≤ ± 1%FS (top)
Nonlinear BFSL (consistency) ≤ ± 0.5%FS
Hysteresis and repeatability ≤± 0.3%FS
Zero thermal drift ≤± 0.1%FS/10K (typical)
≤ ± 0.2%FS/10K (top)
A full range of thermal drift ≤± 0.1%FS/10K (typical)
≤ ± 0.2%FS/10K (top)1000m3/h
Diameter DN6…DN250
Filtering requirements caliber DN10, DN15 filtering particles less than 20 microns Diameter DN20, DN25 filtering particles less than 30 microns
Diameter greater than DN32 filtering particles less than 50 microns Electrical specifications (EN60770)
Electrical specifications (EN60770)
The signal output (with short circuit protection) 4-20mA, pulse, Hart, RS485
The power supply voltage (UB), with polarity protection 24VDC ± 10%, 220VAC
The power supply voltage influence degree ≤ ± 0.01%FS/10V
Current limit (linear output signal is up to 1.5 times the rated range) 28mA (typical)
Load (RL), connected to the 0V RL ≤ (UB-10V) /0.02A[.]
Environmental conditions
Environmental conditions
Sensor temperature range of -20 ℃…80 ℃, -20 ℃…120 ℃
Ambient temperature range (depending on the electrical connection of -40 ℃ ~80 ℃);
The environmental humidity ≤ 85%RH (20 ℃)
The transport / storage temperature range of -40-85 ℃
The transport / storage temperature range of -40-85 ℃
EMC EN 61000-6-3 (emission)
EMC (disturbance) conditions, RF field of 10 V/m, 26 MHz – 2 GHz deviation < 2% FS EN 61000-6-2
Insulation resistance Ω > 100 M (100 V)
Power frequency test based on SEN 361503
Seismic stability sine: 15.9 mm-pp, 5 Hz – 25 Hz IEC 60068-2-6
Sine: 20 g, 25 Hz – 2 kHz
Sine: 20 g, 25 Hz – 2 kHz
Anti impact impact: 500 g / 1 ms IEC 60068-2-27
Free fall: 1 m IEC 60068-2-32
Protection level (degree of protection connector, with matching can be achieved) IP65
Explosive environment
Explosion-proof grade Exd IICT6
Mechanical properties
Electrical connection terminal
Electrical shell material of aluminum alloy
The main material of stainless steel
Stainless steel impeller material
Threaded connection, flange connection